ELECTRODEPOSITION OF SILVER THIN FILMS ON A GOLD SUBSTRATE IN THE PRESENCE OF OCIMUM GRATISSIMUM (Og) AND VERNONIA AMYGDALINA (Va) PLANT LEAF EXTRACTS.

Abstract

Electrodeposition an advanced thin film deposition method originally used for decorative purposes and now widely used in industrial applications such as electronics, phonics, magnetic recording and protective coatings, has also been used for the production of size and structure-controlled nanoparticles. In this research, the electrodeposition of silver (Ag) films on gold (Au) substrates with two plant (Ocimum gratissimum (Og) and Vernonia amygdalina (Va) leaf extracts as additives was explored . The effect of these leaf extracts immediately after addition and after a prolonged exposure in the electrolyte on the silver deposits was studied using cyclic voltammetry (CV), chronoamperometry (CA) and linear sweep voltammetry (LSV). Silver thin films were electrodeposited on gold film from an electrolyte of 5 mM AgNO3 and later 5 mM AgNO3 +0.1 M KNO3 for 10 minutes, using a double potential step protocol and potentials -0.15 V and -0.3 V with and without the plant leaf extracts. As silver was grown on the gold substrate, silver nanoparticles were also discovered to have been formed in the electrolyte. Though the deposition potential in the presence of the plant leaf extracts affected the kinetics of the silver deposition on the gold substrate, it only slightly affected the silver film thickness on the gold. CV graphs with the plant leaf extracts show lower current densities indicating a slowing down of the deposition/dissolution rates of silver probably due to the adsorption of the leaf extracts on the surface of the growing silver films which may have affected the transport of silver ions (Ag+) towards the electrode and impacted on the silver deposition/dissolution kinetics. The deposited silver film thickness was 7 nm to 8 nm with the Og leaf extract and 1.5 nm to 2 nm with the Va leaf extract. Atomic Force microscope (AFM) was used for viewing the silver films and the mean grain sizes of the Og silver films was calculated to be . This was larger than those of the Va silver films calculated to be While the Va silver films surface roughness was higher at 10.6 , that of the Og silver film was 9.3.