Electrode Effects on Flexible and Robust Polypropylene Ferroelectret Devices for Fully Integrated Energy Harvesters.

Abstract

This work presents a characterization study of the electrode interface in polypropylene ferroelectret nanogenerators. An emphasis is made on the comparison of carbon nanotube fiber electrodes with traditional metallic thin film electrodes. Multiple experiments were performed on samples with the same electrode dimensions for a range of applied pressures. Results showed higher open-circuit voltage peak values for the thin film metal electrodes, regardless of the applied pressure. Interestingly, the difference in short-circuit current values between metal and carbon nanotube-based fiber electrodes was not as significant. The carbon nanotube fiber electrode was further investigated by post-treating the fiber with acetone and comparing the results with untreated carbon nanotube film electrodes and thin film metal electrodes. In an effort to enable a monolithic integration of ferroelectret energy harvesters with flexible energy storage elements, this work also presents studies on generation and leakage of induced free charge in the electrodes of flexible ferroelectret energy harvesters. It was found the current leakage through parasitic elements is a faster process than dipole relaxation in the polypropylene film. Finally, an electrode reliability study shows no significant difference in the electrical output of the devices with metallic thin film electrodes after single folding but shows a significant deterioration after crumpling; meanwhile, these processes had no effect on the performance of similar devices with carbon nanotube fiber-based electrodes.