Electrochromic display devices of tungstic oxide containing vanadium oxide or cadmium sulphide as a light-sensitive layer

Abstract

Solid-state electrochromic display devices (ECDs) have been prepared using vacuum deposited tungstic oxide as the primary electrochromic material. Such devices form colour during irradiation from a fluorescent-tube as light source. Initial experiments incorporated (evaporated) CdS films and the proton-conducting poly(ethylene oxide)-phosphoric acid electrolyte (1:1) plasticised with acetonitrile. Successful photoelectrochromic devices were prepared in this way provided the electrolyte was anhydrous, since films of CdS are sensitive to water-attack. Another device to evince photoelectrochromism was one containing layers of WO 3 and V 2O 5. This combination of oxides was the most promising, responding to a 1/20s flash of intense white light. As yet, the colour formed in this way cannot be electro-bleached. These displays may also be used as normal—electrolytically driven—devices in the absence of irradiation.