Abstract
ELECTROCHEMISTRY STUDY ON THE RELATIONSHIP BETWEEN GRAIN BOUNDARY STATE AND CORROSION BEHAVIOR OF ULTRAFINE GRAINED IRON CHROMIUM ALLOY. Research on stainless steel corrosion resistance continues to grow today. This reality cannot be separated from the needs of stainless steels in various fields, one of which is bio-implant. In this research, the effect of grain size on the corrosion behavior of iron-chromium (Fe-Cr) alloy was investigated. Coarse grain Fe-Cr alloy was first processed with equal channel angular pressing (ECAP) for eight cycles to obtain ultrafine grain structure. The coarse and ultrafine grain samples then were then tested using XRD, SEM-EBSD, and the pitting corrosion properties tested using potentiodynamic polarization method in NaCl 1 M solution. The result of XRD dan SEM-EBSD shows that the initial sample is truly has a coarse grain structure, while ECAP produces an ultrafine grain structure. Corrosion test results showed that the ultrafine grain sample had better pitting corrosion resistance compared to the coarse grain sample. This behavior is related to the rate of passivation that depends on non-equilibrium grain boundaries, which can be easily observed in the ultrafine grain structure. Based on these results, it can be concluded that the ultrafine grain Fe-Cr alloy has a better corrosion resistance compared to the coarse grain.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.