Abstract
This study presents the assessment of the performance of a photoelectrochemical reactor for the simultaneous degradation of organic microcontaminants (OMCs) and inactivation of bacteria in real surface water. Target OMCs were terbutryn, clorfenvinphos and diclofenac (500 μg l-1 each), and E. coli K12 (106 CFU mL−1) was used as the model microorganism. The reactor utilised a photoanode consisting of two Ti mesh electrodes anodised to give aligned self-assembled TiO2 nanotubes on the surface. Two cathode materials were investigated i.e. Pt and carbon felt. Higher E. coli inactivation rates were observed with electrochemically assisted photocatalysis (EAP) with a 2-Log Reduction Value (LRV) for Pt and 2.7-LRV in 2 h for carbon felt cathode, as compared to only a 0.8 LRV for photocatalysis (open circuit). For the simultaneous degradation of OMCs and inactivation of bacteria a 4.5-LRV was achieved in 90 min with applied potential and a carbon felt cathode. Similar degradation kinetics were observed for the OMC for both electrochemically assisted photocatalysis and photocatalysis (open circuit) with ca 70 % of the removal of the total OMCs in 60 min. Hydroxyl radical, H2O2 and chlorine generation were also evaluated to elucidate the mechanisms of degradation and disinfection. This work suggests that electrochemically assisted photocatalysis is more efficient than photocatalysis alone for the combined removal of OMCs and disinfection of water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.