Abstract
This study reports the synthesis of a few-layered graphene (GF) thin film on Ni foam by chemical vapor deposition (CVD) technique and investigation of its electrochemical performance as a negative electrode for lithium-ion batteries (LIBs). A standard deposition procedure with a methane precursor was employed to prepare the GF films. The SEM studies revealed the formation of a dark uniform film on the surface of Ni foam’s wires upon the CVD deposition. The film consisted of numerous GF sheets replicating the shape of the Ni grain boundaries over the Ni wire surface. The Raman spectroscopy of the prepared films on the Ni foam confirmed that the samples are a few-layered GF with high quality and purity. In order to evaluate the potential of the use of the prepared materials as an anode in LIBs, their electrochemical performance was studied in coin-type lithium half-cells using cyclic voltammetry (CV) and galvanostatic cycling. The results of CV showed that both graphene and native oxide layer (NiO) on nickel foam exhibit electrochemical activity with respect to lithium ions. Galvanostatic cycling revealed that both GF and NiO contribute to the overall capacity, which increases upon cycling with a stable Coulombic efficiency of around 99%. The designed 3D GF coated NiO/Ni anode demonstrated a gradual increase of its areal charge capacity from 65 μAh cm-2 at the initial cycle to 250 μAh cm-2 at the final 250th cycle.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.