Electrochemical studies on the corrosion performance of new advanced anticorrosive pigments

Abstract

PurposeThis study aims to synthesize a series of new anticorrosive pigments using a new technique called “core-shell”. This technique is based on depositing thin surface layer of expensive, efficient anticorrosive pigment on a cheap extender. This extender forms the bulk of the new pigments. The new pigments were constructed on cores of either waste silica fume or kaolin comprising 80-85 per cent of their chemical structure, and the ferrite shell was about of 20-15 per cent. Electrochemical studies were undertaken on two series of pigments for comparison between ferrites/silica fume and ferrites/kaolin pigment to show their performance, as the shells are different.Design/methodology/approachThe different ferrites/silica fume and ferrites/kaolin pigments were characterized using different analytical and spectrophotometric techniques, such as X-ray fluorescence (XRF) and transmission electron microscopy (TEM). Immersion test and electrochemical impedance measurements were done in 3.5 per cent NaCl.FindingsThe tests revealed that paint films containing Sr ferrite/silica and Ca ferrite/kaolin were the most effective in corrosion prevention.Practical implicationsSilica fumes have a large array of uses. These pigments can be applied in various industries such as painting, wooding coating, anti-corruption coating, powder coating, architectural paint and waterproof paints. Treated kaolin can be applied in many industries besides pigment manufacture and paint formulations; it can be applied as a reinforcing filler in rubber, plastics and ceramic composites.Originality/valueThe new pigments are considered ecofriendly materials, because using them converts a waste product and a natural ore to useful marketable product, leading to reducing cost and saving the environment at the same time.