Abstract
The Gadolinium Doped Ceria (GDC) diffusion barrier layer was formed on the Yttrium Stabilized Zirconia (YSZ) electrolyte to apply La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) cathode system for lowering the operating temperature of Solid Oxide Fuel Cell. In this study, YSZ and GDC layers were coated by one-side dip coating method which possibly coat one-side of anode substrate. Cu(NO3)2 was infiltrated into pre-sintered substrate of anode and electrolyte as a sintering aid for lowering the co-firing temperature which was enough to produce dense electrolyte layer. LSCF-GDC cathode was coated on the GDC layer by screen printing method. The cells were operated at 600℃ and 650℃. The microstructures of the surface and cross-section were observed by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS). The ohmic and polarization resistance were measured by the Electrochemical Impedance Spectroscopy (EIS).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
