Abstract
This work evaluates porous Sr0.86Ti0.65Fe0.35O3 (STF35) as a possible oxygen electrode material for Solid Oxide Cells. The powder synthesis was performed by solid state method. Characterization included DC electrical conductivity study of sintered bulk samples and impedance spectroscopy study of symmetrical electrodes deposited on gadolinium doped ceria substrates. Measurements were carried out in atmospheres with different pO2 levels: 0.1%–20% O2. Detailed equivalent circuit analysis was carried out in order to clarify the reaction pathway on porous electrode, which extends knowledge available for dense model electrodes. At 800 °C in 21% O2, the DC electrical conductivity of STF35 pellet was 0.6 S cm−1 and the polarization resistance of the electrode in the symmetrical cell was ∼100 mΩ cm2. Detailed impedance spectroscopy studies revealed that the largest contribution (∼80%) towards the polarization resistance is due to oxygen adsorption, which is limiting the oxygen reduction performance of the porous STF35 electrode. These results show the applicability of advanced impedance analysis methods (e.g. Distribution of Relaxation Times - DRT) for description of complex impedance electrode phenomena of porous electrodes.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
