Electrochemical Passivation of Aluminum As a Current Collector for Solid-State Polymer Batteries : PEO/LiTFSI Polymer Electrolyte

Abstract

Investigation of the electrochemical properties and passivation mechanism of aluminum as a current collector for solid-state polymer batteries is carried out. Herein, electrochemical stabilities of Polyethylene glycol (PEO) based solid-state electrolyte containing Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt are proved using electrochemical dynamic- and transient-mode polarization with surface scratching. These results indicate that Al metal undergoes passivation with a layer below 4.5 V vs. Li+/Li. And then Time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) reveal double layers are formed during the passivation on Al metal surface, with the outer layer composed of metal fluorides (AlF3) and the inner layer composed of metal oxides (Al2O3). The formation of the AlF3 layer on Al metal surface is attributed to the reaction between Al2O3 and HF following as Al2O3 + 6HF → 2AlF3 + 3H2O. Therefore, successful passivation achieved by the formation of AlF3 on the Al2O3 surface of Al metal facilitates to be widely used as a current collector for lithium metal polymer batteries. Therefore, successful passivation by the formation of AlF3 on the Al2O3 surface of Al metal making it a promising choice for the positive electrode in lithium metal polymer batteries.