Abstract
In this study, coal tar wastewater was treated by electrochemical oxidation technology using lead dioxide anodes. The influence of operating parameters, including applied current density, electrode gap and initial pH value, on the removal ratio of chemical oxygen demand (COD) was investigated. The results demonstrated that the COD removal ratio reached 90.5% after 3.5 h electrolysis with the current density at 3 A dm-2 and electrode gap at 1.0 cm. Correspondingly, the COD decreased from 5,125 mg L-1 to 487 mg L-1, which fitted the wastewater discharge standards of China, and the specific energy consumption (SECCOD) was 35.3 kWh kgCOD -1. Not only was the COD removal ratio only 77.1% after 2 h electrolysis but the BOD5/COD ratio of the wastewater reached 0.44, which could be biochemically treated, and the SECCOD decreased by 34.3%. Moreover, the main composition of pristine wastewater before and after 2 h electrolysis was analyzed by GC-MS, and the disappearance of macromolecules (such as ethyl-2-pyrenemethanol) and the production of small molecules (such as propane-1,3-diol) could improve the biodegradability of the wastewater. Therefore, electrochemical oxidation for 2 h is a promising alternative for pretreatment of coal tar wastewater prior to biological treatment.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
