Electrochemical noise assessment of effect of sol parameters on the performance of an eco-friendly silane sol-gel coating on 304L stainless steel

Abstract

ProposeThis paper aims to access the protective function of hybrid sol-gel coatings deposited on 304L stainless steel substrate in silane solutions containing a mixture of tetraethoxysilane, methyltriethoxysilane and glycidyloxypropyltrimethoxysilane with different pH values during various immersion periods.Design/methodology/approachThe 304L stainless steels coated through 10 and 30 s of immersion in the silane solutions with pH values of 2.1 and 2.8 were exposed to NaCl solution. The corrosion resistance of the coated substrates was studied through taking advantage of electrochemical noise method as well as atomic force microscopy (AFM), water contact angle and field emission-type scanning electron microscopy (FESEM) surface analysis.FindingsThe electrochemical current noise, PSD (I) plot, noise resistance and characteristic charge as parameters extracted from electrochemical noise method indicated the superiority of eco-friendly silane coating deposited on the substrate surface during 10 s exposure to the solution, due to the film uniformity and homogeneity as confirmed by FESEM and AFM. Moreover, immersion of the stainless steel in the silane solution with pH 2.1, characterized by higher hydrolysis ratio, led to more effective corrosion control in the NaCl electrolyte according to the results of electrochemical noise and FTIR measurements.Research limitations/implicationsThe noise resistance and characteristic charge as electrochemical noise parameters were only used in this research to evaluate the protective behavior of the water-based silane sol-gel coatings. Future studies should examine the correlation between electrochemical noise data and the parameters extracted from other electrochemical methods, e.g. electrochemical impedance spectroscopy.Practical implicationsThe data obtained in this research may provide an effective approach based on electrochemical noise method to screen the silane sol-gel coatings for protection of metallic substrates against corrosion.Originality/valueAccording to the literature, no report can be found studying the effect of immersion time on a silane solution, including glycidyloxypropyltrimethoxysilane, tetraethoxysilane and methyltriethoxysilane, as well as the silane solution pH on the corrosion resistance of 304L stainless steel in NaCl solution through electrochemical noise method.