Abstract
The synthesis of derivatives of dithionepyrrole is a hot subject that has been studied extensively. In this study, a novel approach for constructing different glucose biosensors using conducting polymers of 4-(4H-dithyinol[3,2-b:2′,3′-d]pyroll-4-yl)aniline and 4-(4H-dithyinol[3,2-b:2′,3′-d]pyroll-4-yl)-[1,1′-biphenyl]-4-amine is proposed. After the synthesis and characterizations of the dithionepyrrole type monomers, they were used in glucose biosensing applications. The surface of gold electrode was modified with mercaptoethane sulfonic acid and p-aminothiophenol functionalized gold nanoparticles and aniline modified GOx. Electrochemical measurements were carried out by following the consumed oxygen due to the enzymatic reaction of glucose oxidase. DTP-Ph-NH2/AuNP/GOx and DTP-Ph-Ph-NH2/AuNP/GOx biosensors showed very good linearity between 0.1 and 2.5mM, and 0.05 and 1mM for glucose, respectively. LOD value was obtained for pDTP-Ph-NH2/AuNP/GOx as 5.00×10−2mM and for pDTP-Ph-Ph-NH2/AuNP/GOx as 9.86×10−5mM using S/N ratio. Optimization of molar ratio amount of AuNP/GOx, cycles amount to immobilize AuNP/GOx, conducting polymer thickness were examined. Finally, under optimized conditions, the amount of glucose in spiked human serum samples and recovery experiments were conducted.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
