Abstract
In the present work we have employed allyl diglycol carbonate (CR-39) and cellulose triacetate (CTA) plastic for detection of neutron recoil tracks without radiator. For CR-39, the results reveal that registration efficiency is a function of duration of chemical pre-etching and the best results are obtained with chemical pre-etching of 3 hours. It was also investigated that the ac field strength of 28 kV/cm having 2.5 kHz frequency was optimum for revelation of tracks. Interestingly the sensitivity is fluence dependent and it was constant up to a fluence of about 108 n/cm2. The sensitivity abruptly decreased with increased fluence. At optimum experimental conditions the minimum detection limit for CR-39 was found to be 0.47 mSv. For CTA, the tracks have been revealed by electrochemical etching (ECE) only and the minimum detection limit was found to be 0.85 mSv at optimum experimental parameters.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
