Abstract
Abstract Background Calcium channel blockers belonging to the dihydropyridine family have been used as a potent arterial vasodilator in the management of angina and cardiovascular diseases. In the design of glassy carbon electrode coatings for the study of the same, multiwall carbon nanotubes (MWCNT) are favored. They are known for the reduction and oxidation of electroactive species towards cathodic and anodic direction with the simultaneous enhancement of the peak current. Results The MWCNT-modified glassy carbon electrode exhibited a sharp anodic peak potential at around at 0.5 V for amlodipine (AMLD) andnimodipine (NIMD), and 0.4 V for felodipine (FELD) in the cyclic voltammograms. The antihypertensive drugs were determined using a simple two-step procedure developed which comprised a preconcentration step followed by the differential pulse stripping voltammetric quantification. Concentration calibrations were linear within the range from 0.01 to 0.3 μg/mL for AMLD and FELD, and 0.025 to 0.3 μg/mL for NIMD. Conclusion The lower limit detection (LOD) was found to be very low on modified electrode. The LOD is 0.005 μg/mL for AMLD and FELD, and 0.01 μg/mL for NIMD. The prepared electrode showed an excellent electrocatalytic activity towards the oxidation of antihypertensive drugs leading to a remarked improvement in sensitivity. An electrochemical sensor featuring the MWCNT-modified electrode was applied successfully as the result for the calcium channel blocker determination in pharmaceutical samples.
Highlights
Premature deterioration of concrete structures mainly occurs due to the ingress of chloride ions and carbon dioxide [1]
Some authors argue that those compounds which are used to protect concrete reinforcement are not effective [10] when the concrete is kept immersed in NaCl solution, whereas others report that some compounds are effective in reducing corrosion rate of steel rebar in concrete contaminated with chlorides [22, 23]
It is understandable from the polarization data that at very low concentration (50 ppm), sodium nitrite acted as a corrosion antagonist, i.e., the corrosion rate of steel rebar treated with nitrite was greater than that of the rebar immersed in concrete pore solution (CPS) without nitrite
Summary
Premature deterioration of concrete structures mainly occurs due to the ingress of chloride ions and carbon dioxide [1]. Some authors argue that those compounds which are used to protect concrete reinforcement are not effective [10] when the concrete is kept immersed in NaCl solution, whereas others report that some compounds are effective in reducing corrosion rate of steel rebar in concrete contaminated with chlorides [22, 23]. The present investigation aims to explain the behaviour of these chemical species on steel rebar in contaminated concrete pore solution. Chemicals such as trisodium citrate (98%), sodium chloride (> 99.9%), NaNO2 (EMSURE®) and zinc acetate (> 99%) were purchased from Merck Millipore. To investigate the surface morphological changes on the steel rod dipped in simulated concrete pore solution [46, 47], microscopic studies were performed using Leica Stereo Microscope (S8ACO)
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
