Electrochemical Degradation of a Real Pharmaceutical Effluent

Abstract

In this work, the electrochemical treatment of an effluent from the pharmaceutical industry with boron-doped diamond electrodes was investigated. The electrolyses were carried out in a discontinuous operation mode under galvanostatic conditions, using a bench-scale plant equipped with a single-compartment electrochemical flow cell. The effect of operating conditions, such as current density (from 25.7 to 179.4 mA cm2) and flow rate (from 104.8 to 564.7 cm3 min−1), at residence times between 0 and 570 min, was studied. Design of experiments was used for optimizing the process. The global contribution of operative parameters and evolution of the residence time in TOC removal was studied, and a time of 77 min was obtained in order to evaluate the highest influence of the operative parameters. For this time, ANOVA test reported significance for four of the five involved variables. The current density was found to have a considerable positive effect on TOC removal, whereas the flow rate was found to have a moderate negative effect on target variable.