Electrochemical Characterization of Single Lithium-Ion Conducting Polymer Electrolytes Based on sp3 Boron and Poly(ethylene glycol) Bridges

Abstract

A novel series of single lithium-ion conducting polymer electrolytes (SLICPE) based on sp3 boron and poly(ethylene glycol) (PEG) bridges is presented, in the context of the development of a new generation of batteries, with the aim to overcome the problems related to concentration overpotential and low ion transport numbers in conventional solid polymer electrolytes (SPE). The phase separation generated by the physical mixture of SPE with plasticizers such as poly(ethylene oxide) is still a serious problem. In this work, the use of PEG with different chain lengths, for the polycondensation reaction with LiB(OCH3)4, to synthesize SLICPE allows preventing phase separation while tuning the predominant conduction mechanism, and thus the electrical properties, especially the lithium-ion transference number. The ionic transport is promoted by chain mobility as the chain length is increased. SLICPE with the best ionic conductivity values (4.95 ± 0.05) × 10-6 S cm-1 was the one synthesized from poly(ethylene glycol) with an average MN of 400 (BEG8), having an O/Li+ ratio of 20. The lithium transference number ( tLi+) and electrochemical stability window of SLICPE membranes at 25 °C decreased as the PEG bridge length between sp3 boron atoms increased from 0.97 to 0.88 and 5.4 to 4.2 V vs Li0/Li+, respectively, for SLICPE synthesized from PEG with an average MN of 50-400 (BEG1 to BEG8).