Abstract

In this research, novel PVC based nanocomposite ion exchange membrane was prepared by casting technique. ZnO nanoparticles were employed as semiconductor additive in membrane fabrication. The effect of nanoparticles concentration on properties of home-made membranes was studied. A relatively uniform surface for the membranes and uniform particles distribution were observed in SOM images. The membranes were characterized in different electrolyte conditions “concentrations/pH”. Results revealed that membrane water content, membrane potential, transport number and selectivity were enhanced initially by increase of additive concentration up to 10wt% in membrane matrix and then showed decreasing trend by more additive loading. The ionic permeability and flux were also decreased initially by increase in additive content up to 5wt%. The permeability and flux were increased another time by more increase in additive content. An opposite trend was observed for membrane electrical resistance. Moreover, membranes showed higher transport number and selectivity at pH 7 compared to other pH values. Membrane electrical conductivity was decreased by increase of pH value. Also membrane transport number and selectivity were initially enhanced by increase of electrolyte concentration and then began to decrease slightly at high electrolyte concentration.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.