Abstract

Electrochemical characteristics of surface-fluorinated graphite samples with average particle diameters of 25 and 40 μm (NG-25 and NG-40) have been investigated in 1 mol dm −3 LiClO 4–ethylene carbonate (EC)/diethyl carbonate (DEC) at 25 °C. The fluorine contents obtained by elemental analysis are 0.2–0.4 at.% and the surface fluorine concentrations obtained by X-ray photoelectron spectroscopy (XPS) are 4–12 at.% for the samples fluorinated between 150 and 300 °C. Raman spectra and transmission electron micrographs indicate the increase in the surface disordering of graphite. The surface areas of graphite samples are increased by 64–77% and the mesopores with diameter of 2–3 nm are also increased by surface fluorination. The charge capacities of surface-fluorinated samples are larger than those of original graphites and even the theoretical capacity of graphite, 372 mAh g −1. The increments of the capacities are ∼10 and ∼13% for 25 and 40 μm graphite samples, respectively. Nevertheless, the first Coulombic efficiencies are the same as those of original graphites for the samples fluorinated between 150 and 300 °C. The increase in the capacities was discussed on the basis of surface compositions and structures of fluorinated graphite samples.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.