Abstract
Abstract Electrochemical behaviour of polyaniline–polyurethane (PANi–PU) antifouling coating in 3.5 wt% NaCl is studied by electrochemical impedance spectroscopy (EIS). A thick coating (∼1 mm) of 10, 15 and 20% PANi in marine grade PU, is cast over corrosion resistant aluminium alloy 2024 and its impedance characteristics are measured by EIS and compared with neat PU. On addition of 10% PANi, the impedance of the coating drastically comes down from 10 9 to 10 7 Ω. 20% is the maximum processable amount of PANi for the selected PU system. The coatings are exposed to 3.5 wt% NaCl and its impedance characteristics are monitored as a function of time. Changes in the impedance characteristics of the systems were found to occur as a function of the exposure time in all cases, though their evolution with time showed marked differences with PANi content. Water sorption and break down frequency are derived from the experimental results and analysed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
