Abstract
The surface quality of the stainless steel affects the efficiency of flexible photovoltaics. Chemical mechanical polishing (CMP) is a finishing process that is used to prepare substrates for electronic devices. The CMP slurry composition is an important factor because additives in the slurry generally improve the polishing performance. However, it is limited to find the optimum conditions for the slurry by only experimental approaches. Thus, this study uses electrochemical analysis and friction monitoring to examine the effects of the abrasive, oxidizer, chelating agent, and pH. Electrochemical and monitoring analysis are useful for validating predictions and understanding interactions between the slurry and the stainless steel surface. Good correspondence was found between the predictions and the polishing results in more accurate. The corrosion rate (CR) obtained from the potentiodynamic polarization curve is proportional to the experimental results, as is the behavior of the curve and the coefficient of friction (COF). After only 3 min CMP, the best performing slurry (abrasive 39 wt %, oxalic acid 1 wt %, H2O2 0.03 wt %, pH 1.5) improved the surface quality of 304 stainless steel by 4 nm. As a result, the proposed methods could help reduce the risks involved in stainless steel CMP slurry and these results could provide a reference for optimizing CMP slurry for flexible 304 stainless steel substrates.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
