Abstract

Recently, promising results were obtained in studies of the electrocaloric effect in thin films. Therefore, research into this effect at high applied electric field values in bulk ferroelectrics is an important task for those scoping out materials that could be appropriate for cooling devices based on the electrocaloric effect. The present study addresses electrocaloric effect in (1−x)(0.8Na1/2Bi1/2TiO3-0.2BaTiO3)−xCaTiO3 solid solutions by the direct method in electric fields ranging from 0 up to 100 kV/cm and at temperatures of up to 150 °C. The choice of 0.8Na1/2Bi1/2TiO3-0.2BaTiO3 as the starting composition is motivated by high spontaneous polarization within the studied range of electric fields, while CaTiO3 is added to reduce depolarization temperature at, and below, room temperature. In the studied temperature range, the maximal value of electrocaloric effect with temperature change of ΔT = 1.0 °C was found in the composition with x = 0.050 at 100 °C, having significant contribution from the entropy jump at the first-order phase transition induced by an electric field. At increasing CaTiO3 concentration, the attainable ΔT decreases. Measurements of polarization current, which were taken simultaneously with ΔT measurements, allowed us to study differences between ΔT obtained by the direct and the indirect methods.

Highlights

  • The electrocaloric effect (ECE) has attracted great interest, as it could be applied for designing active cooling elements, especially in micro and power electronics, and environmentally friendly air-conditioning and cooling systems

  • A large number of electrocaloric effect studies have been published. They bring a certain optimism regarding the prospect of implementation of electrocaloric cooling. It concerns ECE obtained in thin films

  • In the accessible moderate electric field range (20–30 kV/cm), only a few compositions have been found with values of ECE temperature change ∆T exceeding 1 ◦C

Read more

Summary

Introduction

The electrocaloric effect (ECE) has attracted great interest, as it could be applied for designing active cooling elements, especially in micro and power electronics, and environmentally friendly air-conditioning and cooling systems. In the accessible moderate electric field range (20–30 kV/cm), only a few compositions have been found with values of ECE temperature change ∆T exceeding 1 ◦C.

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call