Abstract
Residual facet reflection can significantly degrade the performance of electroabsorption modulated lasers (EMLs) operating at high data rates. This issue also complicates the fabrication and characterization of the highly demanded light sources for optical interconnects and transmission. It is desired to optimize the device structure to make EMLs robust and immune to residual facet reflection. EMLs with a partially corrugated-grating DFB section are designed and optimized to have much improved tolerance to the residual optical reflection from the modulator output facet. By designing the laser section with an appropriate grating length and linear gain coefficient, the EML can have good tolerance to residual facet reflection. The analysis indicates that 100% yield can be obtained with the optimal design. If the EML needs to operate over a wide ranges of gain coefficient and facet reflection, >70% of yield can still be obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
