Abstract
Enhancement of mass transfer coefficient is highly desirable for economic design of process equipment. The present study is essentially carried out to know the effect of flow variables such as gas and liquid velocities and geometric parameters of the internal on mass transfer coefficients in a three phase fluidized bed. The mass transfer coefficient data were obtained using a string of cones internal in a three-phase fluidized bed electrochemical reactor. The flow system investigated was nitrogen, a fluid electrolyte and spherical glass beads as gas, liquid and solid phases respectively. Limiting current technique was employed to obtain mass transfer data. The internal comprises of a string of cones arranged concentrically on a central rod which is placed coaxially in a three phase fluidized bed. The presence of internal in three phase fluidized beds augmented the mass transfer coefficient significantly. In the present investigation it was found that the effect of gas velocity, liquid velocity, rod diameter and cone diameter was only marginal. However, the influence of pitch, half apex angle of cone and particle diameter was found to be significant. Correlations were developed based on least squares regression analysis for the prediction of mass transfer coefficient in terms of pertinent variables.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.