Abstract
ABSTRACT Pilot-scale electro-oxidation equipment with a functional capacity of 0.2 m3/hr, with titanium electrodes coated with TiO2/RuO2/IrO2 as both anodes and cathodes, was designed. It was installed on the premises of a commercial tannery. The waste streams from all the unit processes were combined. The composite wastewater, after conventional pre-treatment was subjected to electro-oxidation. The treated wastewater was reused four times with intermittent electro-oxidation treatment, after each reuse. EO could bring about a significant reduction in pollution load. Reduction in BOD, COD, TKN and TSS was 92%, 87.5%, 96.2% and 94.6% respectively. Generation of oOCl radicals, during electro-oxidation, were ascertained with DMPO-spin trapping techniques using Electron Spin Resonance (ESR) spectroscopy. The characteristics of the treated wastewater indicated that the wastewater was fit for reuse. No significant change in the quality of the water after each reuse was observed. The physical properties of the leathers obtained following the reuse processes were akin to those of the control leathers, which was indicative that the reuse did not cause adverse quality deviations. This technique could provide the plausibility for minizine the discharge of wastewater to near-zero level.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
