Electro-localization method using a muscle conductive phantom for needle position detection towards medical training

Abstract

Simulation in healthcare can help train, improve, and evaluate medical personnel’s skills. In the case of needle insertion/manipulation inside the muscle during an nEMG examination, a training simulator Requires estimating the position of the needle to output the electrical muscle activity in real time according to the training plan. External cameras can be used to estimate the needle location; however, different error sources can make its implementation difficult and new medical sensing technologies are needed. This study introduces and demonstrates the feasibility of a conductive phantom that serves as the medium for needle insertion and senses the 3D needle position based on a technique named electro-localization for the first time. The proposed conductive phantom is designed so that different voltage distributions are generated in the phantom using electrodes placed on its borders. The needle is inserted in the phantom, and the recorded voltages are mapped to spatial coordinates using a finite element method (FEM)-based computational model of the conductive phantom to estimate the 3D needle tip position. Experimental and simulation results of phantom voltage distributions agreed. In 2D mapping (no depth consideration), the needle position error was 1.7 mm, which was marginally reduced if only the central area of the phantom was used (1.5 mm). In 3D mapping, the error was 4 mm. This study showed the feasibility of using a conductive muscle phantom as a new embedded sensor that estimates needle position for medical training of nEMG without relying on external sensors.