Abstract
Electro-chemical mechanical polishing (ECMP), which combines anodic oxidation and soft abrasive polishing, was applied to single-crystal SiC. Ceria (CeO2) slurry was used as an electrolyte for anodic oxidation as well as a polishing medium to remove the oxide layer. As a result of anodic oxidation, the surface hardness decreased from 34.5 GPa to 1.9 GPa, which made it possible to polish the oxidized SiC surface using a very soft abrasive such as CeO2. It was found that the material removal rate (MRR) of ECMP for a diamond-abrasive-polished surface was 3.62 μm/h. ECMP using CeO2 slurry was conducted for 30 min on a diamond-abrasive-polished surface. All the scratches were completely removed and a smooth surface with a root mean square (RMS) roughness of 0.23 nm was obtained.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
