Electro‐bio‐mechanical behavior of graphite nanoplatelets–silicone rubber‐based composites for wearable electronic systems

Abstract

AbstractAdding graphite nanoplatelets (GNP) into silicone rubber (SR) composites have shown significant potential for wearable electronics, where electrical, mechanical, and tribological properties play a crucial role. This study investigates the effects of incorporating graphite nanoplatelets (GNP) into SR composites and their impact on these key properties. Solution mixing of SR and GNP was performed to confirm good dispersion of the GNP within the SR matrix. The results showed improved tensile strength and modulus while stabilizing the flexibility and stretchability required for wearable electronics. For example, the tensile strength of the composites was 0.86 MPa (control) and increased to 1.18 MPa (5 part per hundred rubber [phr] GNP), and 1.55 MPa (15 phr GNP). Similarly, the stretchability was 177 % (control) and increased to 190 % (5 phr GNP), and 184 % (15 phr GNP). Moreover, the electro‐mechanical tests were studied and the output voltage for the samples were 0.28 milli‐volt (mV) (5 phr GNP), and 0.31 mV (15 phr GNP). Similarly, the output voltage generation was studied through human motions. The results obtained from these biomechanical motions such as thumb pressing were 0.7 mV (5 phr GNP), and 2.7 mV (15 phr GNP). The study finds the potential of GNP‐SR composites as multifunctional materials such as wearable electronics. Overall, this research guides the development of advanced wearable devices, soft robotics, and bio‐inspired electronics with improved performance and durability.