Electrically Controlled Liquid Crystal Elastomer Surfaces for Dynamic Wrinkling

Abstract

Liquid crystal elastomers (LCEs) are becoming increasingly popular as a shape memory material for soft robot actuators that operate in a contractile or flexural mode. There have been previously studies on the use of LCEs for reversible changes in surface topography. However, surface protrusions have typically been limited to the order of 1 μm or depend on light, heat, or electrical stimulation that are difficult to locally control or require relatively high voltage. This article presents a novel operation mode of LCE actuators based on the wrinkling behavior of an LCE‐elastomer bilayer architecture. Embedding a liquid‐metal‐based conductive ink within the LCE enables electrical control of surface wrinkling through Joule heating. The actuator cells can generate wrinkles with amplitudes ranging from 17 to 45 μm within 30 s under an input power of 2 W and a voltage on the order of 1 V. As the bilayer is composed entirely of soft materials, it is highly deformable, flexible, and can be integrated into a multi‐cell array capable of bending on curved surfaces.