Abstract
Free-standing films of bacterial cellulose (BC) and polyaniline (PAni) (BC/PAni) composites with high electrical conductivity values (0.9 S cm−1) and good mechanical properties (40 MPa) were prepared through in situ oxidative chemical polymerization of aniline (Ani) on the surface of synthesized BC nanofibers by using FeCl3·6H2O, as oxidant. The influence of polymerization conditions such as oxidant content, protonic acid, and reaction time on electrical conductivity, morphological, tensile properties and thermal stability of the BC/PAni composites was investigated. Electrical conductivities of BC/PAni composites increased with increasing reaction time due to the formation of a continuous layer that completely coated the nanofiber surface. FTIR spectra of BC/PAni composites produced with and without protonic acid exhibited overlapped absorption bands of both BC and PAni, except for quinoid and benzoid bending modes of PAni. The in situ oxidative chemical polymerization gives rise to conducting membranes with the surface constituted by different PAni content, as indicated through CHN elemental analysis. The crystalline structure of BC was not affected by the incorporation of PAni. Scanning electron microscopy analysis of the composites revealed that PAni consisted of nanoparticles around 70 nm in mean size to form a continuous coating that encapsulates the BC nanofibers. The BC/PAni composites obtained by the method described in this work have interesting properties that may find important technological applications such as sensors, electronic devices, intelligent clothes, flexible electrodes and tissue engineering scaffolds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.