Electrical conductivity of new zinc phosphate glass/metal composites

Abstract

Zinc phosphate–glass/metal composites have been successfully prepared. Glass with composition of 45mol% ZnO–55mol% P2O5 (ZP) has been filled with metallic powders (nickel and cobalt). The glass matrix thermal stability has been assessed by differential thermal analysis technique. The morphology has been examined by scanning electronic microscopy, showing almost homogenous composites. Comparison between the measured and calculated densities as a function of metallic content exhibits a good coherence and allows the estimation of porosity inside the composites. X-ray diffraction analysis has revealed that the ZP-matrix phase is amorphous when the temperature treatment is below the glass transition temperature Tg. However, the principal peaks observed in the case of the composites have been assigned to the metallic crystals of nickel or cobalt fillers. It has been found that the phosphate glass phase is not affected by the growing of the metallic network. The electronic conductivity measurements versus filler volume fraction have been investigated for the first time on phosphate–glass/metal composites. This study has shown the occurrence of a conducting transition at around 30% filler volume fraction. The obtained result has been interpreted on the basis of the statistical percolation theory frame.