Electrical conductivity of a monolayer produced by random sequential adsorption of linear k-mers onto a square lattice.

Abstract

The electrical conductivity of a monolayer produced by the random sequential adsorption (RSA) of linear k-mers (particles occupying k adjacent adsorption sites) onto a square lattice was studied by means of computer simulation. Overlapping with predeposited k-mers and detachment from the surface were forbidden. The RSA process continued until the saturation jamming limit, p_{j}. The isotropic (equiprobable orientations of k-mers along x and y axes) and anisotropic (all k-mers aligned along the y axis) depositions for two different models-of an insulating substrate and conducting k-mers (C model) and of a conducting substrate and insulating k-mers (I model)-were examined. The Frank-Lobb algorithm was applied to calculate the electrical conductivity in both the x and y directions for different lengths (k=1 - 128) and concentrations (p=0 - p_{j}) of the k-mers. The "intrinsic electrical conductivity" and concentration dependence of the relative electrical conductivity Σ(p) (Σ=σ/σ_{m} for the C model and Σ=σ_{m}/σ for the I model, where σ_{m} is the electrical conductivity of substrate) in different directions were analyzed. At large values of k the Σ(p) curves became very similar and they almost coincided at k=128. Moreover, for both models the greater the length of the k-mers the smoother the functions Σ_{xy}(p),Σ_{x}(p) and Σ_{y}(p). For the more practically important C model, the other interesting findings are (i)for large values of k (k=64,128), the values of Σ_{xy} and Σ_{y} increase rapidly with the initial increase of p from 0 to 0.1; (ii) for k≥16, all the Σ_{xy}(p) and Σ_{x}(p) curves intersect with each other at the same isoconductivity points; (iii) for anisotropic deposition, the percolation concentrations are the same in the x and y directions, whereas, at the percolation point the greater the length of the k-mers the larger the anisotropy of the electrical conductivity, i.e., the ratio σ_{y}/σ_{x} (>1).