Abstract
The condensation mechanism of the insulators’ surface, increase the surface electrical conductivity. The electrical conductivity of the insulator creates a high level of leakage current and causes the failure. Difference between the dew point and the surface temperature of the insulator which occur due to radiative cooling mechanism, is the major reason of the moisture condensation on the polluted insulator surface. To compensate for the temperature difference, carbon nanotubes (CNTs) are being added to the silicone rubber housing material. The main idea of this research is based on generating joule heating by reducing the surface resistance of high voltage insulators. For this purpose, a developed model based on Halpin–Tsai formulation for tensile modulus of nanocomposites is joined with the conventional power-law model for the effective electrical conductivity of silicone rubber matrix carbon nanotube composite (SMCNT). SMCNT samples are prepared with the addition of various CNT volume fractions to high temperature vulcanizing (HTV) silicone rubber by melt-blending method. The developed model reveals that the high fraction of thinner and longer CNT, thicker interphase, higher concentration of percolated CNT, lower waviness of CNT, and higher conductivity of CNT can make a higher effective conductivity for SMCNT.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.