Abstract
Silicon dioxide (SiO2), silicon nitride (SixNy), and zinc sulfide (ZnS) with ammonium sulfide [(NH4)2S] as a prepassivation surface treatment were compared as passivants for InAs/GaSb strained layer superlattice detectors with a 0% cutoff wavelength of ∼10 μm. SiO2 did not show significant improvement and the zero-bias resistance-area product (R0A) was 0.72 Ω-cm2 at 77 K. SixNy passivation showed a nominal improvement with an R0A value of 4.1 Ω-cm2 at 77 K. ZnS with (NH4)2S treatment outperformed others significantly, improving the R0A value to 492 Ω-cm2 at 77 K. Variable-area diode measurements indicated a bulk-limited R0A value of 722 Ω-cm2. ZnS-passivated diodes exhibited maximum surface resistivity with a value of 2500 Ω-cm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
