Abstract
Polymeric source chemical vapor deposition (PS-CVD) was used to synthesize amorphous silicon carbide (a-SiC) thin films. The PS-CVD process was conducted at temperatures between 750 and 1000 °C. The substrates used were silicon single crystal wafers of p-type and n-type, and thermally grown silicon dioxide substrates. The chemical and electrical properties of the films were studied by various techniques, including Fourier transform infrared spectroscopy, elastic recoil detection (ERD), and capacitance–voltage technique. A correlation was observed between the average concentration of oxygen in the films and the deposition temperature, linking a low oxygen concentration to a high deposition temperature. However, the concentration of oxygen in the films deposited at the same temperature is independent of the substrate. The thin films deposited at low temperature showed insulating behaviour, while the semiconducting behaviour is obtained at high deposition temperatures. Ohmic contacts were obtained on the deposited semiconductor thin film by evaporating nickel contacts, followed by annealing of the sample at 800 °C for 2 min.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.