Electrical breakdown in dielectric liquids-a short overview

Abstract

Listen

Translate article

Power transformers are utilized to convert high voltages normally used in electrical power transmission to lower voltages more suitable for consumers. A transformer consists essentially of a magnetic iron core with primary and secondary copper windings. The alternating current flowing in the primary winding induces a magnetic flux in the core, which in turn creates a current in the secondary windings. If there is a difference in the number of turns in the primary and secondary windings, the secondary voltage will be scaled up or down proportionally to the ratio of the turns. In this way, a high voltage can be transformed to a low voltage. However, the desire to convert increasingly greater electrical loads using smaller power transformers results in both higher electrical and thermal stresses. The materials utilized to insulate the different electrically conductive components from each other must be designed to withstand those stresses. The insulating media often consist of pressboard and an insulating liquid. The liquid performs a double duty as it not only insulates the conductive parts but also functions as a liquid coolant. Here we are primarily interested in the oil as an insulating medium.