Abstract
AbstractA novel process for preparation of conductive polypyrrole/poly(vinyl chloride) (PPy/PVC) composites by pre‐localization of an intrinsically conducting PPy phase in a PVC matrix has been developed. This process involves encapsulating PVC particles with a thin layer of PPy, and subsequently compacting this PPy‐encapsulated PVC powder by compression molding. The current‐voltage characteristics and electrical conductivity of the pre‐localized PPy/PVC composites were determined. The change of the current‐voltage characteristics from linear to nonlinear behavior with increasing PPy content in the composites is discussed in the view of the intermolecular hopping and tunneling of electrons. The tensile properties, dynamic mechanical behavior, and microhardness of the pre‐localized PPy/PVC composites were studied as a function of PPy content. A percolation threshold of 0.3 wt% is achieved in the pre‐localized PPy/PVC composites. This value is much lower than those of the conventional conductive composite materials containing a random distribution of PPy fillers. The samples with a PPy content of 1.6 wt% or above have high conductivity and still preserve reasonable mechanical properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.