Abstract
The degradation mechanism of flash sintering 8 mol% yttria stabilized zirconia, which results in poor densification and crumbling of the samples under direct current, was investigated. Microstructure analysis revealed highly strained grain boundaries and nanopore formation at the grain boundaries after flash sintering with a direct current. A higher current density experiment gave a varied microstructure with dimpling similar to metallic microvoid coalescence near the negative electrode, a highly porous “swiss-cheese” like microstructure in the pellet interior, and melting and recrystallization near the positive electrode. These characteristics were not observed under an alternating current. Phase field simulations predicted an oxygen vacancy buildup and potential reduced phases along the grain boundaries, which lead to the depletion of free holes and dramatic increase of free electrons. This results in high tensile stresses at the grain boundaries, which explains the degradation along the grain boundaries after flash sintering under direct current.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.