Abstract
Densification, thermal conductivity and transparency of aluminium nitride ceramics densified by electric current assisted sintering are reviewed. Aluminium nitride powders could be densified without any sintering additives by electric current assisted sintering. Sintering additives, Y2O3 or CaF2, and others are effective for densification, increase in thermal conductivity and transparency. As a result of the reaction with the sintering additives and oxide on the surface of the AlN powder, a secondary phase forms between AlN grains, oxygen impurity between aluminium nitride grains decreases and thermal conductivity increases. These mechanisms are effective in the sintering of aluminium nitride ceramics densified by electric current assisted sintering, though sintering time is short, within 5 min. The secondary phase formation does not always give good effect for transparency.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
