Electric and Morphology Studies of Ohmic Contacts on AlGaN/GaN

Abstract

ABSTRACTAlGaN/GaN is a promising system for high power electron devices. Quality of ohmic contacts is a critical parameter in determining the performance of the device. Although we have achieved a transfer resistance (Rc) of 0.35Δmm and ρc of 9.5×10−7 Δcm−2 the morphology and edge acuity of the contacts are poor. The standard ohmic contact recipes consist of a combination of Titanium and Aluminum with Nickel and/or Gold. This is annealed at 800°C-950°C [1-5]. In this work we study ohmic contacts on unintentionally doped Al0.3Ga0.7N/GaN system. We look at ratios of Ti/Al from 0 to 2 to determine which is the optimum ratio in terms of surface morphology and electrical characteristics. From our studies we conclude that morphology of a Ti/Al contact is good over a ratio of 0.3 and the contact resistance is minimized at a Ti/Al of 0.6. The ohmic contacts are improved electrically if a layer of gold is added on top. The best electrical contacts however were obtained with a four layer recipe of Ti/Al/Ti/Au, which gave contact resistance (Rc) around 0.45Δmm, but the morphology of the contacts was poor.