Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts

Abstract

This article presents the results of a series of thermal elastohydrodynamic lubrication (EHL) analyses of a set of disc experiments carried out by Patching et al. The authors have previously calculated the heat partition at each load stage fromthe experimental data, and the present work seeks to compare the heat partition developed in a thermal EHL analysis of the lubricant film with that calculated from the experiments. These EHL analyses show that the heat partition depends on the non-Newtonian formulation used. Only when the dissipation takes place by wall slip occurring at the faster moving surface do the heat partition results approach those determined from the experimental results. It is concluded that this combination of experimental heat partition results with associated EHL analysis can prove to be a much more discerning test of rheological behaviour in EHL contacts than is provided by measurement of traction.