Elastic wave dispersion and attenuation caused by multiple types of disc-shaped inclusions

Abstract

PurposeThe purpose of this paper is to numerically investigate time-harmonic elastic wave propagation with the analysis of effective wave velocities and attenuation coefficients in a three-dimensional elastic composite consisting of infinite matrix and uniformly distributed soft, low-contrast and absolutely rigid disc-shaped micro-inclusions.Design/methodology/approachWithin the assumptions of longitudinal mode of a propagating wave as well as dilute concentration and parallel orientation of inclusions in an infinite elastic matrix, Foldy’s dispersion relation is applied for introducing a complex and frequency-dependent wavenumber of homogenized structure. Then, the effective wave velocities and attenuation coefficients are directly defined from the real and imaginary parts of wavenumber, respectively. Included there a far-field forward scattering amplitude by a single low-contrast inclusion given in an analytical form, while for the other types of single scatterers it is determined from the numerical solution of boundary integral equations relative to the displacement jumps across the surfaces of soft inclusion and the stress jumps across the surfaces of rigid inclusion.FindingsOn the frequency dependencies, characteristic extremes of the effective wave velocities and attenuation coefficients are revealed and analyzed for different combinations of the filling ratios of involved types of inclusions. Anisotropic dynamic behavior of composite is demonstrated by the consideration of wave propagation in perpendicular and tangential directions relatively to the plane of inclusions. Specific frequencies are revealed for the first case of wave propagation, at which inclusion rigidities do not affect the effective wave parameters.Originality/valueThis paper develops a micromechanical study that provides a deeper understanding of the effect of thin-walled inclusions of diversified rigidities on elastic wave propagation in a three-dimensional composite. Described wave dispersion and attenuation regularities are important for the non-destructive testing of composite materials by ultrasonics.