Abstract
Surface cracks have long been recognized as a major cause for potential failures of metal pipes. In fracture analysis, the widely used method is based on linear elastic fracture mechanics. However, for ductile metal pipes, it has been known that the existence of plasticity results in easing of stress concentration at the crack front. This will ultimately increase the total fracture toughness. Therefore, when using linear elastic fracture mechanics to predict fracture failure of ductile metal pipes, the plastic portion of fracture toughness should be excluded. Otherwise, the value of fracture toughness will be overestimated, resulting in an under-estimated probability of failure. This paper intends to derive a model of elastic fracture toughness for steel pipes with a circumferential crack. The derived elastic fracture toughness is a function of crack geometry and material properties of the cracked pipe. The significance of the derived model is that the well-established linear elastic fracture mechanics can be used for ductile materials in predicting the fracture failure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
