Abstract
Abstract The four-point bend “sandwich” specimen, comprising two identical linear-elastic substrates joined by a thin elastic layer, is widely used in the study of strength and toughness of bimaterial joints loaded under nominal mode I loading. As an aid to crack monitoring in such specimen geometries, the linear-elastic compliance based on load-line displacement, back-face strain, and crack-opening displacement has been determined for a wide range of substrate/layer material combinations using finite-element analyses. Calculations for bimaterial systems, with elastic moduli ratios varying from 0.2 to 5 and with joining layer thicknesses between 100 and 500 μm, show that for crack sizes between 0.1 to 0.7 of the specimen width, the compliance is significantly different from that of the bulk substrates, even when the layer is very thin. It is concluded that crack-opening displacements are preferable for the monitoring and detection of interfacial and near-interfacial cracks in this specimen geometry, as the compliance based on these displacements is the least sensitive to errors from either measurement site or crack location.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.