Abstract
To lower the smelting temperature associated with the carbothermic reduction processing of laterite, the optimization of slag and alloy systems was investigated to enable the reduction of laterite ore in the molten state at 1723 K. The master Fe-Ni-Mo alloy was successfully produced at a lower temperature (1723 K). The liquidus of the slag decreased with the addition of oxide flux (Fe2O3 and CaO) and that of the ferronickel alloy decreased with the addition of Mo/MoO3. More effective metal–slag separation was achieved at 1723 K, which reduces the smelting temperature by 100 K compared with the current electric furnace process. A small addition of Mo/MoO3 not only decreased the melting point of ferronickel alloys but also served as a collector to aggregate the ferronickel sponges allowing them to grow larger. The FeO concentration in the slag and the nickel grade of the alloy decreased with increasing graphite reductant addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
