Abstract
A lab-scale membrane bioreactor (MBR) was employed to carry out the partial nitritation/Anammox (PN/A) process from conventional activated sludge. Seed sludge was cultivated under microaerobic conditions for 10 days before seeding into the MBR. The bacterial community was analyzed on the basis of cloning and sequencing of 16S rRNA gene. Relative slow ammonia oxidation rates (3.2–13.0 mgN/L/d) were established in the microaerobic cultivation period. In the continuous MBR operation, the nitritation was achieved in the first 16 days and the reactor produced a balanced ratio between ammonia and nitrite which favored the proliferation of Anammox bacteria. Efficient transition from PN to PN/A was achieved in two months which was supported by appearance of reddish spots on the reactor inner wall and the concurrent consumption of ammonium and nitrite. The PN/A performed a robust and high-rate nitrogen removal capability and achieved a peak nitrogen removal of 1.81 kg N/m3/d. 16S rRNA gene-based analysis indicated that “Nitrosomonas sp.” and “Candidatus Jettenia sp.” accounted for ammonia oxidation and nitrogen depletion, respectively. Denitratisoma facilitated denitrification in the reactor. The present study suggested that a pre-cultivation of seed sludge under microaerobic conditions assists fast realization of PN and further convoyed efficient transition from PN to PN/A. Knowledge gleaned from this study is of significance to initiation, operation, and control of MBR-PN/As.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.