Efficient sonocatalytic degradation of pyrene using a novel and magnetically recoverable graphitic carbon nitride – cobalt ferrite – graphene oxide (g-C3N4/CoFe2O4@GO) nanocomposite with an enhanced Z-scheme electron transfer pathway

Abstract

The use of ultrasound in the presence of semiconductor materials is considered a novel technique for the degradation of hazardous organic pollutants in water. In this study, graphitic carbon nitride (g), graphene oxide (GO), and Cobalt ferrite, CoFe2O4 (CF) nanoparticles were synthesized via soft-template-assisted synthesis, Hummer's, and hydrothermal methods, respectively. Subsequently, the hybrid magnetic g-C3N4/CoFe2O4/GO (g-CF1@GO, g-CF2@GO, g-CF3@GO, and g-CF4@GO) nanocomposites were prepared via a simple hydrothermal route at 180 °C. The crystallite structure, functional groups, morphology, and energy band gaps were characterized by XRD diffraction, FT-IR, TEM, and UV–vis DRS. The heterostructure nanocomposites were formed, as evidenced by the TEM data, with an average crystallite size of 13.4 nm and band gap energies of 2.19–1.80 eV, suggesting their suitability for sono/photo degradation processes. Pyrene, a tetracyclic polycyclic aromatic hydrocarbon (PAH) was chosen as a model pollutant to evaluate the performance of the prepared nanocomposites toward sonocatalytic degradation. The nanocomposites exhibited higher degradation performances than individual materials. The sonocatalytic degradation of pyrene revealed that the g-CF4@GO nanocomposite exhibited the highest sonocatalytic activity and achieved 86.7 and 92.3 % degradation efficiency for 10 and 5 mg/L of pyrene under ultrasonic irradiation (40 mg/L, 50 W and 20 kHz) in 120 min. In addition, the sonocatalytic degradation of pyrene is performed in the absence of any oxidant and follows a pseudo-first-order kinetics. Trapping experiments were carried out to investigate the sonocatalytic degradation mechanism, and the results showed that ●O2− was the major reactive species. The easily recoverable magnetic nanocomposite via a simple magnet was tested for its recyclability and reusability, and it was observed that it could degrade up to 78 % of pyrene in four cycles.