Abstract
Solution-based processing was applied to fabricate green phosphorescent organic light-emitting diodes (OLEDs). EPH31 was used as a phosphorescent host, doped with guest dopant green phosphorescent Ir(ppy)3, and dissolved in chlorobenzene solvent to form the emitting layer. Device structural parameters were controlled by changing the spin coating speed of the emitting layer and hole injection layer [poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate), PDOT:PSS] to adjust the thickness of the electron transport layer [tris(8-hydroxyquinolinato)aluminum, Alq3]. In addition, the differences in using CsF and LiF materials as the electron injection layer were investigated. A maximum current efficiency of 13.6 cd·A-1 was obtained at a high emitting layer spin coating speed. Despite the close resemblance in both the luminance intensity and current efficiency when using CsF and LiF as the electron injection layer, CsF devices had a low driving voltage. Smooth and stable films resulting from the spin coated hole injection layer, along with the control of the thickness of the electron transport layer (Alq3) and electron injection layer (CsF), effectively improved the performance of green OLEDs. The emitting layer host material (CBP) and three guest dopants [Firpic, Ir(ppy)3, and Ir(piq)2] were dissolved in toluene solvent during solution preparation to fabricate white OLEDs. The properties of the resulting solution-processed white PHOLEDs are a current efficiency of 2.4 cd·A-1 at 20 mA·cm-2 and CIE coordinates of (0.33, 0.33) at 9 V. Results of these experiments demonstrate that solution processing can be used as an alternative to and in conjunction with thermal evaporation.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
