Abstract
This study describes the potential use of steel-making slag as an arsenic-removal medium. Systematic analysis of slag material revealed a composition of oxides of calcium, iron, silicon, and phosphorous. Under the experimental conditions of this study, the equilibrium time was shown to be 2 hours, and the removal capacity to be 99%, with an adsorbent loading capacity of 1.25g/l. The adsorption kinetics were shown to follow a pseudo-second-order rate equation, and the adsorption isotherm closely followed both the Langmuir and Freundlich isothermic models. Variations in solution pH levels demonstrated that with a decrease in the initial solution pH, the adsorption capacity decreases. This is attributed to the leaching of silica and phosphate from the slag to the solution, which imparted a competing effect for adsorption sites. However, with an alkaline pH, such leaching was reduced, and due to formation of calcium carbonate from the leached calcium from the slag material, the arsenic removal efficiency increased as it was co-precipitated with calcium carbonate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
