Abstract
Monodispersed polystyrene (PS, ca. 300nm) latex particles are incorporated into a TiO2 film. A polystyrene-modified TiO2 film (M-TiO2) with micro-cluster structure, containing micro/nano-composite pores is thus obtained after sintering. Cadmium sulfide (CdS) quantum dots (CdS-QDs) are accumulated over M-TiO2 and bare TiO2 films (B-TiO2) by successive ionic layer adsorption and reaction (SILAR); we designate these films as M-TiO2/CdS and B-TiO2/CdS, respectively. Influence of SILAR cycles used for depositing CdS on B-TiO2 and M-TiO2 films on the performance of the pertinent quantum dot-sensitized solar cells (QDSSCs) is studied. The QDSSC with 6 SILAR cycles of M-TiO2/CdS (M-TiO2/CdS6) exhibited a solar-to-electricity conversion efficiency (η) of 1.79%, while the cell with B-TiO2/CdS5 shows an η of 1.35%, under the illumination of one sun. Moreover, guanidine thiocyanate (GuSCN) is found to be a promising additive to the polysulfide electrolyte. The additive renders higher conversion efficiency (2.01%) to its QDSSC. Durability of the CdS-QDSSC is also tested. Scanning electron microscopy (SEM) is used to obtain the images of TiO2 films and energy-dispersive X-ray spectroscopy (EDX) is employed to study the stoichiometric ratios of M-TiO2/CdS and B-TiO2/CdS. Incident photon-to-current conversion efficiencies (IPCE) of the QDSSCs are obtained to confirm the JSC behaviors of the cells.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
